Carbon Clean Engine Detox

New Carbon Clean machine is on its way.

We are experiencing more and more cars that are down on power due to a combination of intake and combustion areas being built up with carbon, largely reducing the efficiency and power. We have invested in a ‘OxyHydrogen Carbon Cleaning’ Machine. This machine is run through the intake system to clean the combustion area, which can be done without any major dismantling. To take things to the next level we have also purchased a ‘Walnut Blaster’. Walnut blasting of the intake system does require some dismantling/removal of the intake system to gain excess. However removing these large carbon deposits with allow the engine to breath again. Restoring power and fuel economy = more fun and more bang for your buck at the pump.

The Carbon Cleaning machine wont do the intake manifold and intake valves which generally require more invasive work, We do have a Walnut blasting machine for this service if you are serious about regaining some engine efficiency…


Some of the first cars run through the Carbon Cleaning process. all cars will be different, I felt instant improvement in my Mercedes.)
Carbon Clean machine in action on a VW, while we prep our Mercedes for a stage 1 remap.

How does HYDROGEN clean carbon deposit in the engine?

The Hydrogen Carbon clean unit runs on distilled water and electricity. The hydrogen and oxygen are produced using a mix of distilled water and electrolysis, this is then feed into the engine via the air intake/breather hose or air box.

The increased internal oxygen proportion improves combustion and at the same time the catalytic properties of hydrogen make it possible for the combustion carbon to be gradually broken down to clear the internal carbon deposits.

A strong electric current splits the water molecule (H2O) into its component atoms producing highly charged particles of hydrogen and oxygen, or oxy-hydrogen (HHO). The HHO is passed into the engine and burnt as the engine runs mixing the HHO with the fuel. As it passes through the induction system, combustion chamber, exhaust etc, the hydrogen reacts with the carbon deposits turning the carbon into hydrocarbons, this lifts the carbon deposits from the engine and the resulting gas exits the engine via the exhaust system.

Using no harsh chemicals the treatment returns your engine to a state of cleanliness. You regain power and performance, restore lost MPG and drastically cut emissions.

After treatment, there is no need to change engine oil or any type of filter.

The machine acts to restore the optimum performance of your engine. Using hydrogen technology, carbon deposits are removed from the inner workings of the engine, which naturally build up during the lifetime of the vehicle.

By removing unwanted carbon build up, further engine deterioration and damage can be avoided. This will keep your engine working more effectively and smoothly for longer, creating an enhanced driving experience.

The technology works with all types of vehicle’s – from motorbikes to planes if it has a combustion engine then it can be cleaned. Both petrol and diesel and LPG engines will show improvements irrespective of vehicle age and/or value.

Audi S3 getting a stage one, good idea to help that new tune breath with an engine detox. Hydrogen Carbon Clean running…

2 comments

Mike Middleton said:

Reply
April 16, 2021 at 4:02 PM

What is the approximate cost of both the Hydrogen clean & the walnut blasting. This is for my Mercedes CLS 320 CDI

Tyler Broad said:

Reply
April 24, 2023 at 10:11 AM

Want to get all the carbon out of my hilux intake as it’s feeling sluggish, how much to do a carbon clean on manifold and intake,

Also want to block egr off I’ve heard it’s good to do that to prevent carbon buildup.

Write a Comment

Fields with * are required